YJ216 Wiegand 26/34 or RS232/485 Proximity Card Reader

Specification
·Less than 0.2 second Response Speed
·Less than 0.5 seconds Proximity Time Distance:
·2-15cm Proximity Range
·Support EM-ID 125Khz or Mifare 1 Card (13.56 MHz Frequency)
·-25℃ to 75℃ Ambient Temperature,10%-90% Ambient Humidity
·Built-in Antenna
·Built-in LED (Double Color LED)
·Built-in Loud Speaker (Buzzer)
·DC 12V Working Voltage,70mA Working Current
·100 Meters Communication Distance
·Real Time Data Transfer
·Black or white Color
·Size: 86*86*10(mm)

Installation
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection
Red DC 5V-16V
Black GND
Blue D1
White D0
Brown BEEP
Green LED
Yellow Alarm

Notice!
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply.
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with

at least 1.5 square cm Dia, or using several parallel Network wires.

YIJIAMEITechnologyCo.,Ltd.

YJ216 Proximity card reader